Worker selecting roof tiles from warehouse racks

Roof Repointing & Ridge Capping Cost NSW (2027 Guide)

Recycled ridge caps stacked at the Recycling Roof Tiles yard in Doyalson NSW
2027 cost guide · NSW

Roof Repointing & Ridge Capping Cost NSW (2027 Guide)

What ridge work really costs per metre, when you need a repoint rather than a full rebed, and how to stop paying for the same ridge twice.

Get Matching Ridge CapsCall 0427 241 224
✓ 2027 prices · published November 2026✓ Written by the Recycling Roof Tiles yard team✓ Doyalson NSW · since 2019✓ About 15 min read

AT A GLANCE

In 2027, repointing ridge capping in NSW costs about $42 to $85 per lineal metre. A full rebed and repoint costs about $85 to $130 per metre. On a typical single-storey home, that works out to roughly $1,250 to $2,650 to repoint, or $2,100 to $4,800 to rebed and repoint.

Those are the numbers. The more useful question is which of the two jobs your roof needs, because that one decision roughly doubles or halves the bill. This guide is written from the supply side of the trade: what goes onto a ridge, what goes wrong, and what it costs to fix.

Recycling Roof Tiles logo
By the Recycling Roof Tiles yard team, Doyalson NSW. Led by an owner with over 40 years of roofing industry experience and a trade-qualified yard team. Recycling Roof Tiles is the trading name of Beniross Pty Ltd (ABN 37 632 359 221), registered in 2019 and trading from our covered Doyalson warehouse. Roof tilers collect their bedding, pointing and replacement caps from our yard every morning, so we see what ridge jobs actually use and where they go wrong.
Published November 2026 with 2027 prices · Reviewed every year

QUICK ANSWER

How Much Does Roof Repointing Cost in NSW in 2027?

Repointing ridge and hip capping over sound bedding costs about $42 to $85 per lineal metre in NSW in 2027. A full rebed and repoint, where every cap is lifted and relaid on new mortar, costs about $85 to $130 per lineal metre.

A typical single-storey three-bedroom home has 25 to 40 metres of ridge and hips: roughly $1,250 to $2,650 to repoint, or $2,100 to $4,800 to rebed and repoint. Small repairs to a few caps typically cost $440 to $1,300. On two-storey or steep roofs, scaffolding or edge protection can add $1,000 to $3,000.

Recycled concrete roof tiles and caps stacked at the Recycling Roof Tiles yard in Doyalson

Recycled ridge caps at our Doyalson yard. On most ridge jobs, spare caps are the only material that costs real money.

The 2027 Price Table

Ridge work is priced by the lineal metre of ridge and hip. The table below gives 2027 planning ranges for NSW, including GST. They start from published 2026 NSW trade price guides and add about 5% for annual cost growth. The method is set out at the end.

JobUnit2027 estimateWhat you are paying for
RepointingPer lineal metre$42 – $85Old pointing removed, new flexible pointing over sound bedding
Rebed and repointPer lineal metre$85 – $130Caps lifted, old mortar removed, rebedded, pointed, weep holes
Small ridge repairPer job$440 – $1,300A few loose or cracked caps, one short section (Central Coast)
Replacement ridge capPer cap, material only$8 – $20Recycled matching cap. Rare terracotta pieces cost more
Scaffold or edge protectionPer job, if required$1,000 – $3,000Two-storey, steep or exposed roofs
Full tile roof restorationWhole roof$4,200 – $11,500Clean, repairs, rebed and repoint, primer and two coats
HomeRidge + hip lengthRepoint onlyRebed and repoint
Small home or simple gable15 – 25 m$850 – $1,600$1,300 – $3,250
Typical 3-bed, single storey25 – 40 m$1,250 – $2,650$2,100 – $4,800
Large or complex hip roof40 m +$2,100 – $4,200 +$3,400 – $6,500 +

All figures include GST and are estimates for standard residential work. A licensed roofer’s measured quote is the only firm price.

Repointing vs Rebedding: The Decision That Sets the Price

A ridge cap sits on two layers. Underneath is the bedding, a sand and cement mortar that carries the cap and fills the gap over the tiles. On top is the pointing, a thin band along each edge that seals the joint. On older roofs, that pointing was usually the same rigid sand and cement as the bedding, coloured with oxide. On newer roofs, and on any roof that has been properly restored, it is a flexible acrylic or polymer compound.

Repointing replaces only that top layer. The roofer cuts out the loose old pointing, cleans the edge and trowels on new flexible pointing. It is quick and tidy, and the right job when the caps are still firmly bedded. Rebedding is the bigger job. Every cap comes off, the old mortar is chipped off the tiles, a fresh bed is laid, the caps go back on, and then they are pointed. Rebedding costs more because of the labour, not the materials.

Repoint onlyRebed and repoint
When it is rightCaps firm, bedding sound, pointing cracked or weatheredCaps rock or have shifted, bedding crumbles or is missing
2027 price$42 – $85 per metre$85 – $130 per metre
Time on a typical homeUsually one dayOne to two days
Cap breakageRareExpect some, especially on old terracotta
Risk if chosen wronglyLooks perfect, cracks again within a season or twoPaying double for work the roof did not need
The most expensive ridge job is a repoint over failed bedding. It looks perfect on handover and costs you twice.

The test is simple and any good roofer will do it in front of you: press each cap. A cap that moves, or bedding that falls away as crumbs, means rebedding. Our bedding and pointing guide covers the warning signs in more detail.

What Is Actually on Your Ridge

Price per metre assumes standard caps. Starters, apexes and decorative terracotta pieces are where the surprises come from, because when one cracks it has to be matched.

Concrete ridge cap
Concrete ridge caps
Usually relaid when rebedded
Hip starter caps
Hip starters
Often break during removal
Terracotta saddles
Terracotta saddles
Hard to source, cost more

Comparing the Products Roofers Use

Homeowners rarely see the products on their own roof, but they explain a lot about why quotes differ. These are the pointing and bedding systems most NSW roof tilers work with.

Flexible pointing: four common choices

Every product here is a flexible, water-based compound sold in 10 litre pails and trowelled on 3 to 5 mm thick. In practice, the differences between brands matter less than how well the roofer applies the product and whether the bedding underneath is sound.

ProductWhat stands outUseful detail
Monier Flexible PointingDesigned as an adhesive mechanical fastener for hip and ridge tiles (AS 4046.8)About 22 m of ridge per 10 L pail, cure time 24 hours (Monier data sheet)
Selleys Point Works Gen IIIWidely stocked by roofing suppliers, available in 13 coloursAbout $50 per 10 L at a Sydney roofing supplier, November 2026
Dunlop Tile Pointing (Ardex)Rated C4 for cyclonic regions, 10-year guarantee on pack$39.98 per 10 L at Bunnings, November 2026
Dulux Acratex Roof PointingPart of the Dulux Acratex roofing rangeTouch dry in 30 minutes, water resistant after 2 hours (Dulux)

Prices are retail listings checked in November 2026 and will move. Trade prices are often lower.

Bedding: premix, site-mix or bedding-free

Most bedding in NSW is still site-mixed: yellow brickies sand and GP cement, such as the Eureka GP Cement we stock, mixed on the ground and carried up. It is cheap and roofers can adjust the mix to suit the cap. Premixed bags such as Cement Australia Roof Tile Bedding Mortar cost more per metre, but the mix is consistent. Cement Australia rates one 20 kg bag at about 3 lineal metres of ridge. There are also one-step systems such as Monier’s ONEGO, which replaces sand and cement bedding and pointing with a single compound. They are quicker, but check that the system suits your cap profile before buying.

Rigid cement pointing vs flexible pointing

If your roof has never been restored, its pointing is probably rigid oxide-coloured cement. Tiles and timber move with heat and moisture, and rigid cement cannot flex with them, so it cracks in hairlines along the joint. Water then gets into the bedding behind it. Flexible pointing stretches with the roof. That is why almost every repoint in NSW now uses a flexible compound, and why a quote that still lists sand and cement pointing deserves a question.

Yellow brickies sand used for bedding ridge caps

Where the Money Actually Goes

Take a 30 metre rebed and repoint on a single-storey home. About 75 caps are already on the roof and most will be reused. Allow around 8 spares in case some crack, at $8 to $20 each recycled. The bedding needs about ten bags of premix, or the equivalent in sand and cement. The pointing needs two 10 litre pails. All up, the materials come to a few hundred dollars.

The rest of a $2,500 to $3,900 job is a skilled tradesperson on a roof for one to two days, with safety gear, waste removal and a workmanship warranty. That is why the cheapest saving on a ridge job is rarely the materials. It is avoiding a second visit.

Bedding sand and cement cost little. The labour of lifting and relaying every cap is what doubles a rebed quote.

Estimate Your Own Job

Enter your ridge and hip length for a 2027 planning range and a list of materials. For hips, measure from the eaves to the ridge line and multiply by about 1.5.

2027 COST ESTIMATOR

Estimate Your Ridge Capping Job

Estimated 2027 price range (inc. GST)

–

Planning estimate only, based on the 2027 ranges in this guide. A licensed roofer’s measured quote is the only firm price.

Four Typical Jobs, Four Different Bills

These examples are based on the kinds of roofs our yard supplies every week, priced with the 2027 ranges above. They are illustrations, not quotes. They show how the same per-metre rate turns into very different totals.

Recycled Monier Homestead concrete roof tile

Toukley: storm-lifted caps on a 1980s Monier Homestead roof

THE PROBLEM

A single-storey brick-veneer hip roof near the lake, with about 32 metres of ridge and hips and its original rigid pointing. After a winter southerly, three caps on the windward hip have lifted. Inside, the bedding has turned to sand, and rain is reaching the ceiling.

THE FIX AND WHAT IT COSTS

A full rebed and repoint of all 32 metres, not just the three caps, because the bedding has failed everywhere. Allow about $2,720 to $4,160 at 2027 rates, plus around 8 recycled Homestead-matched caps at about $8 to $20 each. On an exposed lakeside site, the roofer should also check whether the wind class calls for ridge clips.

Concrete tile roof on a two-storey home

Hornsby: two storeys, sound bedding, tired pointing

THE PROBLEM

A two-storey home with about 38 metres of ridge and hips. The caps are firm, but the 1990s pointing has hairline cracks and has started lifting at the joints. One quote says rebed. Another says repoint.

THE FIX AND WHAT IT COSTS

The caps pass the press test, so repointing is the right job: about $1,600 to $3,230 for 38 metres. Edge protection or scaffold on a two-storey roof adds $1,000 to $3,000, which can be the biggest single line on the quote. Here, the cheaper scope is also the correct one.

Recycled Wunderlich Marseille pattern terracotta roof tile

Hamilton, Newcastle: a Federation terracotta roof with a cracked saddle

THE PROBLEM

A Marseille-pattern terracotta roof with decorative ridges, saddles and a finial. A tradesman cracked a saddle and two ridges while fixing an antenna. New terracotta parts in that pattern are not made any more.

THE FIX AND WHAT IT COSTS

A small localised rebed of about 3 to 4 metres, in the $440 to $1,300 small-repair band. The real constraint is the parts. Recycled Wunderlich or Montoro Marseille saddles and ridges from a roof of the same era are the only true match, and rare terracotta pieces cost more than standard caps. Source them before the roofer opens the ridge, so the roof is not left exposed.

Membrane roof coating used in a tile roof restoration

Charlestown: ridge work bundled into a restoration

THE PROBLEM

A Boral Macquarie concrete roof with faded colour, a few broken tiles from a solar install, and pointing cracked along two hips. The owners want the roof painted.

THE FIX AND WHAT IT COSTS

Bundle the ridge work into the restoration rather than calling a roofer out separately. A full tile restoration sits at about $4,200 to $11,500 in 2027, and ridge work done inside it usually costs less per metre than as a stand-alone job. The order is critical: replace the broken tiles with recycled Boral Macquarie, rebed or repoint, then prime and coat. Paint never fixes bedding.

Common Ridge Problems We See, and What Fixes Them

Most of the questions roof tilers and homeowners bring to our counter come down to one of a handful of problems.

Pointing cracks again a year after it was redone

THE PROBLEM

Almost always, flexible pointing went over bedding that had already let go. The new compound bonds to a loose base, so it moves and splits. The second most common cause is pointing applied too thin, under 3 mm, which tears at the joint.

THE FIX AND WHAT IT COSTS

Rebed the affected runs properly and repoint at the thickness the manufacturer specifies. That costs $85 to $130 per metre in 2027, so when you get quotes, the first question should be whether the bedding was tested.

The replacement caps do not sit right

THE PROBLEM

A cap from a different brand or era can be wider, narrower or curved differently from the original. It rocks on the tiles, needs extra mortar to pack the gap, and is the first to crack. On an unpainted roof it also stands out.

THE FIX AND WHAT IT COSTS

Match the cap to the tile, not just the colour. Recycled caps from the same roof family, about $8 to $20 each, solve both fit and colour. Send a photo of one cap and one tile, and see our ridge capping tiles page.

A leak near the ridge that repointing did not stop

THE PROBLEM

Water near a ridge is not always coming through the ridge. A cracked tile under the cap, a blocked valley, missing weep holes or a failed flashing at a wall can all leak in the same spot.

THE FIX AND WHAT IT COSTS

Before paying for more ridge work, have the tiles under the caps and the nearby flashings checked. Lead-free flexible flashing such as Fast-A-Flex, and matching recycled tiles, are often cheaper fixes. See our roof tile accessories range.

Two quotes, and one is half the price

THE PROBLEM

The cheaper quote usually covers fewer metres, repoints instead of rebedding, leaves out scaffold, or assumes no caps will break. All of those decisions are invisible until the job is done.

THE FIX AND WHAT IT COSTS

Ask both roofers to list the metres, the scope for each run, the pointing product, the number of spare caps allowed, and the safety equipment. Then compare price per metre for the same scope, not the totals.

Sydney, the Central Coast and the Hunter: Why Prices Differ

Sydney quotes tend to sit at the top of each range. More homes are two storeys, access is tighter, and call-out costs are higher in Hornsby or the Inner West than in Wyong. On the Central Coast and around Lake Macquarie, rates are mid-range, but the coast brings its own costs. Salt air ages pointing faster, and southerly storms lift caps on exposed hips. Many lakeside and ridgetop homes also sit in higher wind classes, where clips or screws are needed as well as pointing. In Newcastle, Maitland and the Hunter, prices are similar to the Central Coast. The older terracotta suburbs, from Hamilton to East Maitland, mean more rare parts to source.

The Rules: Licences, Contracts and Fixing Standards

Ridge work is regulated building work in NSW. Bedding and pointing count as roof tiling, and any residential job over $5,000, including labour, materials and GST, must be done by a licensed contractor. Above that value you need a written contract, and the deposit is capped at 10% of the contract price. Check the licence number on the NSW Government licence check before anyone goes on the roof.

The technical standard matters too. The NCC Housing Provisions, Part 7.3 require ridge and hip tiles to be fixed. In lower wind classes, flexible pointing that complies with AS 2050 counts as that fixing. In higher wind classes, clips or screws are needed as well. A roofer who quotes ridge work on an exposed coastal home without mentioning wind class has missed something.

How to Pay Less Without Paying Twice

The biggest saving is timing. A ridge repointed while the bedding is sound costs about half as much as one left until it needs rebedding. After that, the savings come from keeping the job to one visit. Reuse sound caps. Have matching recycled spares on site before the ridge is opened. Do ridge work alongside tile repairs or a restoration, so the scaffold and set-up are paid for once. And never coat a roof over failing ridges. The paint looks new for a while, but the ridges still have to be done properly later.

Getting your ridges done? Have matching spare caps on site before the roofer starts. Text a photo of one cap to 0427 241 224.

Send Your Tile Photos

Ridge Capping and Repointing Cost FAQs

How much does roof repointing cost in NSW in 2027?

Expect about $42 to $85 per lineal metre to repoint ridge and hip capping over sound bedding. A typical single-storey three-bedroom home with 25 to 40 metres of ridge and hips comes to roughly $1,250 to $2,650.


How much does it cost to rebed and repoint ridge capping?

About $85 to $130 per lineal metre in 2027, because every cap is lifted, the old mortar is cleaned off and the caps are relaid on new bedding. A typical three-bedroom home comes to roughly $2,100 to $4,800.


How much does it cost to fix just a few ridge caps?

A small repair to a few loose or cracked caps or one short section typically costs $440 to $1,300 on the Central Coast in 2027. Most of that is call-out, access and labour.


Which flexible pointing is best?

Monier Flexible Pointing, Selleys Point Works Gen III, Dunlop Tile Pointing and Dulux Acratex Roof Pointing are all widely used in NSW. The application matters more than the brand: 3 to 5 mm thick, trowelled onto sound bedding, with full contact on both the cap and the tile.


Is repointing included in a roof restoration?

Usually, but check the scope. Some cheaper restoration quotes repoint only visibly cracked sections or skip rebedding. Ask for the ridge work to be stated in metres, and say whether it is repointing or full rebedding.


Do I need a licensed roofer for repointing in NSW?

Yes, for any job worth more than $5,000 including materials and GST. Bedding and pointing count as roof tiling work under NSW licensing. Check the contractor’s licence on the NSW Government licence check.


Can I repoint my own roof?

The materials cost a few hundred dollars, but roof work is high-risk, and ridge fixing has to meet the National Construction Code and AS 2050. For most homeowners, the sensible saving is to supply matching spare caps and pay a licensed roof tiler for the work.

Aerial view of recycled roof tiles at the Recycling Roof Tiles yard
Recycling Roof Tiles warehouse entrance in Doyalson
Terracotta roof tiles stacked for laying

Recycled tiles and caps at our Doyalson yard, ready to match roofs across Sydney, the Central Coast and the Hunter.

How We Worked Out These Prices

The 2027 ranges start from published 2026 NSW price guides for ridge repointing, rebedding and small ridge repairs: The Quote Yard’s NSW repointing and rebedding guides, and What’s The Damage’s Central Coast and national roofing cost guides. What’s The Damage reported roofing costs rising about 5.1% a year in late 2026, so we added 5% and rounded. Material quantities come from manufacturer data. Product prices are retail listings checked in November 2026. Cap prices are our own yard prices. The four example jobs are illustrations built from those ranges, not real quotes. We review this guide every year.

Recycling Roof Tiles supplies recycled roof tiles, ridge caps and roofing accessories. We do not install roofs or quote labour. Always get written quotes from licensed roof tilers.

Recycled ridge caps and roof tiles at Recycling Roof Tiles Doyalson
BEFORE YOUR ROOFER ARRIVES

Matching Ridge Caps, Bedding and Pointing in One Trip

Text a photo of one ridge cap to 0427 241 224, or use our contact form. We will identify the profile, check recycled stock, and have the bedding and pointing ready for your roofer.

Open Mon to Fri 6 am to 4 pm (trades from 5:30 am) and Saturday 7 am to 12 pm. 6 David St, Doyalson NSW 2262.

Send Your Tile PhotosCall 0427 241 224
  • Is Painting Your Roof Tiles a Good Idea?

    Is Painting Your Roof Tiles a Good Idea?

    Your roof is one of the most underrated aspects of your home. It plays a major part in the aesthetic of your house and can tie together the building together.

  • How to Deal with Storm Damage to Your Roof in the Central Coast

    How to Deal with Storm Damage to Your Roof in the Central Coast

    Here at Recycling Roof Tiles, we have over 40 years’ industry experience and pride ourselves on creating sustainable and aesthetic roofing.

  • Everything You Need to Know About Monier Roof Tiles

    Everything You Need to Know About Monier Roof Tiles

    Monier roof tiles are an excellent choice of tile for all kinds of properties. With over 100 years in the business, Monier know how to design roof tiles.

  • Choosing Roof Tiles for Your Home?

    Choosing Roof Tiles for Your Home?

    Sometimes a new roof is necessary because the old one is worn out and needs to be replaced. Other times you may want a new roof for its visual appeal.

  • How to Pick Great Second Hand Roof Tiles

    How to Pick Great Second Hand Roof Tiles

    Exterior repairs or any work to do with the construction of your home can be an expensive business. There is some consolation in recycled roof tiles.

  • When is it Time to Replace my Roof Tiles?

    When is it Time to Replace my Roof Tiles?

    Roof tiles are the most popular style of roofing. They look great on your home and offer protection from weather and the elements at the same time.