Call Now
Dakaflash lead free flashing product packaging

Dakaflash

Dakaflash

DAKAFLASH incorporates the reinforced aluminium mesh from Wakaflex with the creped aluminium top sheet and butyl backing from Smartform

DAKAFLASH is a composite laminate flashing consisting of a creped aluminium 

top sheet with a 100% self-adhesive butyl backing. Embedded into this adhesive is the same aluminium mesh that’s inside Wakaflex, which gives DAKAFLASH rigidity and support, as well as allowing for a smooth contoured finish on the roof surface. DAKAFLASH can stretch up to 30% in length and has a two-piece protective HDPE backing.

BEST FOR – New build homes, second storey additions, abutments, chimneys, and flashing maintenance. Use on tile, metal, and polycarbonate roofs.

  • Internal aluminium mesh 
  • Fully self-adhesive butyl backing
  • Creped aluminium surface
  • Can be used as part of a BAL 19 system
  • Complies with AS/NZS 4020:2005 ‘Testing of products for use in contact with drinking water’
  • Only to be used on a roof pitch of at least 12°

DAKAFLASH is the best value lead free flashing available in Australia, and brought to you by the same German manufacturer and Australian distributor that brought you WAKAFLEX.

DAKAFLASH utilises the same inner mesh as WAKAFLEX; for strength and durability, and the same butyl and top sheet technology as SMARTFORM; for ease of installation and UV resistance. DAKAFLASH offers you all of these benefits as well as being up to 30% cheaper than lead.

Compare your cost per lineal metre. See how much you’ll save!!!

DAKAFLASH is the perfect flashing for new build homes, flashing around a chimney or abutment, or repairing a faulty lead flashing. Evo Building Products is confident that you’ll agree; DAKAFLASH is now the best value flashing available in Australia.

Give us a call for a free of charge, no obligation free sample to see what you think.

Download PDF

  • How to Clean Terracotta Roof Tiles Safely (Without Pressure Washing)

    How to Clean Terracotta Roof Tiles Safely (Without Pressure Washing)

    TERRACOTTA ROOF CARE GUIDE The most common advice for cleaning terracotta roof tiles, pressure washing, is also the method most likely to damage them. High-pressure water strips the tile’s protective surface, forces moisture under the tiles, and often makes moss and lichen come back faster and thicker than…

  • Roof Paint Types Explained: Concrete, Terracotta and Metal Coating Systems Compared

    Roof Paint Types Explained: Concrete, Terracotta and Metal Coating Systems Compared

    TECHNICAL REFERENCE GUIDE Concrete tiles, terracotta tiles and metal roofing do not use the same coating system, and treating them as interchangeable is the single biggest cause of early coating failure. Each substrate has a different porosity, a different failure mode and a different primer chemistry it needs…

  • Roof Tile Painting Cost NSW: Full Price Guide, Coating Lifespan and What Actually Drives the Cost

    Roof Tile Painting Cost NSW: Full Price Guide, Coating Lifespan and What Actually Drives the Cost

    ROOF PAINT COST GUIDE A tile roof paint job in NSW typically runs from around $18 to $60 per square metre, depending on tile type, roof condition and access. Most standard homes land somewhere between $3,000 and $9,000 for a full repaint. But the price per litre on…

  • Genuine Match vs Near-Match Roof Tiles: Which Should You Use?

    Genuine Match vs Near-Match Roof Tiles: Which Should You Use?

    TILE MATCHING COMPARISON A genuine matching profile and a near-match substitute can look almost identical from the ground and behave completely differently on the roof. The genuine match shares the same sidelock, water channel and cover width as the surrounding tiles, so it seats, drains and weathers the…

  • Roof Tile Bedding and Pointing: When Should You Repoint or Rebed?

    Roof Tile Bedding and Pointing: When Should You Repoint or Rebed?

    RIDGE CAPPING REPAIR GUIDE Roof bedding supports your ridge caps. Roof pointing is the exposed finishing layer that bonds and seals around them. If the pointing has deteriorated but the bedding underneath remains firm, repointing may be enough. If ridge caps are loose or the bedding is crumbling,…

  • Can You Replace Just a Few Roof Tiles? When a Matching Repair Beats a Full Reroof

    Can You Replace Just a Few Roof Tiles? When a Matching Repair Beats a Full Reroof

    ROOF TILE REPAIR GUIDE Yes, you can often replace just one, two or a handful of roof tiles. If the surrounding roof is sound and the damage is genuinely localised, finding the correct matching tile is usually more sensible than disturbing an otherwise serviceable tiled roof. The important…